2025 Hustler HyperDrive 38.5HP - Kawasaki FX1000 EFI 60"

Information

2025 Hustler HyperDrive 38.5HP - Kawasaki FX1000 EFI 60"

The HyperDrive® features Hustler’s exclusive HyperDrive transmission system – the largest, most durable drive system in the industry. And, it’s backed by a 3,000 hour drive system warranty.

Features may include:

Hydraulic System Warranty
  • 3000-Hour pump and motor warranty unmatched in the industry.
VX4® Deck
  • Fabricated steel deck engineered to move more grass at high speeds while maintaining cut-quality.
Large Drive Tire
  • Large drive tires provide a smoother ride experience. The Super Z offers up to 26" drive tires.
HyperDrive Hydro System
  • A Hustler® exclusive, industrial pumps and high torque wheel motors, 3-gallon reservoir, oil cooler and hot oil shuttle.
Vanguard Big Block™ EFI
  • Optional Vanguard® Big Block™ EFI engine with Oil Guard. (500 hour oil change)

Photos

Highlights

  • Fort Macleod, Alberta
  • 2025
  • Hustler
  • HyperDrive 38.5HP - Kawasaki FX1000 EFI 60"
  • Available
  • w/chute: 66” | Tire: 57”
  • 47.8” • 73.5 w/ ROPs | Cutting: 1”- 5.5”

Specifications

  • 2025
  • Hustler
  • HyperDrive
  • 38.5HP - Kawasaki FX1000 EFI 60"
  • Zero-Turn Mower
  • Vanguard® Big Block™, Kawasaki® FX series
  • 35HP - FX1000
  • FVanguard®: 993cc • Kawasaki: 999cc
  • Air cooled | Air Cleaning: Canister style
  • Hydraulic: Stainless Parker® Seal-Loc Technology
  • Electric PTO clutch
  • Dual hydrostatic
  • Integrated with steering levers
  • 13 x 6.5 - 6 | Tapered wheel bearings and debris cap | Drive tire: 26 x 14 - 12
  • Motors: Parker® TG
  • Drive Speed: Up to 16 mph | Blade Tip: 18,600 | Acress Per Hour: 7.76
  • Danfoss® DDC-20
  • Trim Side: 3.4” | Frame: 1.5” x 3” steel tubing
  • Side discharge: 60” | Rear-discharge: 60”, 72
  • 47.8” • 73.5 w/ ROPs | Cutting: 1”- 5.5”
  • 88” | Blade: 20.50”
  • w/chute: 66” | Tire: 57”
  • 5.5”
  • Dual Fuel Tank w/ 12 Gallon total capacity
  • Construction: Fabricated 7 ga. | Blades: 3 | Deck Lift: Foot operated | Front Axle: Fabricated with tapered roller bearings | Impact/Trim Areas: Front of deck: 11 ga. formed bump bar Side of deck: 1.5” x .375” steel bar
  • 1619-1682 lbs
  • Ductile cast iron with steel shaft and sealed ball bearings | Mount: Reinforced 7 ga. stamped disc
  • Fabricated 1/2” steel
  • I3M™ suspension sea
  • 3 year limited